1. The equipment has a wide range of material characteristics. Among them, it mainly targets at the materials which are easy to scale in the evaporation process and the materials which have crystal precipitation in the evaporation process. Materials whose viscosity increases with the increase of concentration, materials with insoluble solids, etc.;
2. In the evaporation process, the material through forced circulation in the tube fast flow, heat evenly, high heat transfer coefficient, and can prevent dry wall phenomenon.
3. The material liquid is heated quickly by the forced circulation pump through the heater, and the top comes out and enters the separator (crystallizer) in a tangential way. The steam liquid separation effect is good.
4. The material is vacuumized and crystallized at low temperature by the equipment, coupled with continuous feeding and feeding, to ensure the continuous output of saturated fine slurry. The mould with unique design can meet the process requirements of continuous feeding and continuous discharging. The mould is matched with the forced circulation pump, and its internal structure makes the separation of crystal and clear liquid fast and effective.
5. The equipment has compact structure, small footprint, smooth layout, easy operation and stable performance.
6. The equipment can be configured with automatic system to realize automatic feed control, automatic heating temperature control, automatic discharge concentration control, also can be equipped with sudden power failure, protection measures for crystallized materials, alarm and other automatic operation control.
The above information is for reference only.