Industrial sewage evaporator system is simple, easy to operate 1, save investment and operating costs (labor, electricity, steam consumption) 2, no chemicals added when running 3, equipment according to the characteristics of sewage or wastewater, targeted use of anti-corrosion materials manufacturing 4, the system is simple, easy to operate 5, the equipment size is small, accounting for

1. The equipment has a wide range of material characteristics. Among them, it mainly targets at the materials which are easy to scale in the evaporation process and the materials which have crystal precipitation in the evaporation process. Materials whose viscosity increases with the increase of concentration, materials with insoluble solids, etc.; 2. In the evaporation process, the material through forced circulation in the tube

City streets often see the shadow of the multifunctional fog cannon machine, fog cannon also has the traditional type of sprinkler cleaning, before the sprinkler, after the sprinkler function, is worthy of the name of the "multifunctional" car. Dust removal and dust fog when working on the road, the gun will generally spray the sky, over the place like a drizzle, will not wet clothes

1. Environmental protection dust removal spray machine is used in urban PM2.5 air control, pollution control, dust reduction and haze reduction, urban environmental control; 2. Dust pollution control of coal storage yard, coal storage bunker or fully enclosed coal storage place, coal logistics park, coal gathering station, open-pit coal mining, road surface and air after launch; 3.

       A mechanical evaporation system breaks up water via a high-speed rotating atomizing spiral turntable to reach the correct water molecule size, reduces and direct water debris through droplets, improves performance, and then the water is injected into a high volume/high speed air stream

Now in order to change the quality of the air, it is commonly used to carry out artificial rain, but it is obvious that there is no effect, want to change the environmental pollution, the relevant departments to increase the measures to reduce pollution and haze, but also to increase people's awareness of environmental protection. It is the so-called "everyone is responsible for protecting the environment" that drives the power of all people in one

      The small droplets emitted by the high-range sprayer are very fine, which can save water when spraying pesticides, which is very needed now, especially in the arid areas of the north, this advantage is very important.

In recent years, with the continuous development of agriculture, especially since the "12th Five-Year Plan", the agricultural mechanization level of vigorously developing agricultural machinery has been constantly improved. In 2017, attention was paid to the greening of the environmental protection industry. Therefore, various environmental protection machinery was constantly updated and replaced. Among them, the air-driven sprayer has reached a good level.

Air-driven sprayer is a kind of multi-functional dust suppression car. In addition, there are truck type, tower type, towing type and so on. Today's content we mainly introduce air-driven sprayer. It is widely used in the environmental protection industry, mainly because it can control the dust in the air and make the air cleaner. We know the winter atmosphere

Micron level dry fog dust removal efficiency is high, can make water atomization in a short time, humidification efficiency is 99%. There is no need to worry about water on the ground or printed matter, and the safe design of the air road waterway can ensure that there is no dripping or spraying water; Maintenance-free design, stable performance; It can be adjusted automatically according to demand, saving a lot of energy for users

Abstract: A set of hydraulic drive device was designed for the mine monorail crane. The Solidworks modeling software is used to establish the three-dimensional model of the driving mechanism. The stress state of the driving wheel is analyzed, the hydraulic driving circuit is designed, and the driving principle is expounded. The hydraulic modeling software AMESim is used to establish the simplified hydraulic circuit

The dust phenomenon often occurs when dumper is unloading coal. The dust amount mainly depends on the particle size and water content of coal to be unloaded. Especially in winter, in order to prevent the occurrence of frozen coal, coal production enterprises generally reduce the water content of coal, which leads to a large amount of dust in the dump area when unloading coal by port enterprises

Abstract: In this paper, dry fog dust suppression technology as the main research content, combined with the analysis of dust trapping mechanism, combined with relevant principles to understand that when the size of water mist particles are close to each other and the amount of fog is sufficient, the probability of collision and condensation will be increased

Compared with the traditional dry dust collection mode, the dry fog dust suppression device used at the dump and transfer tower at the current port area can not only save water consumption and energy loss, but also eliminate dust particles below 10 microns through the contact, aggregation, adsorption and condensation of water mist with fine dust. Avoid the waste that causes secondary pollution to the atmosphere during the operation of the dry fog dust suppression device

Abstract: The original backwashing mode of filter group in cold rolling water treatment workshop of energy complex plant is designed in direct drainage mode, which does not adapt to the newly added backwashing water local reuse system, affects its continuous operation and water quality standard, and reduces the backwashing water reuse rate. The automatic backwash control program of filter group in each station of cold rolling water treatment workshop was modified

Abstract: Taking the desulfurization wastewater produced in the production process of coal-fired power plant as the research object, the treatment of desulfurization wastewater by mechanical atomization and evaporation technology was discussed. Through theoretical research, the main factors affecting evaporation are found out, including droplet diameter, temperature, wind speed, etc., aiming at the shortcomings of existing natural evaporation technology

The operation of the equipment is very simple. Only one valve handle can be used to move back and forth. The operation is flexible and convenient. The existing cable hauler needs at least 3 ~ 4 people to coordinate the work in order to complete the task when dragging the cable, and the labor intensity is relatively large, in the encounter of a large slope of the working face or the winch

Dry fog dust suppression device can produce water mist particles with a diameter of 1-10 microns, which can effectively adsorb dust suspended in the air, especially inhalable dust particles with a diameter of less than 5 microns and aggregate, and settle under the action of gravity, so as to achieve dust suppression effect

The water mist and smoke machine is a gasoline-fueled, high temperature and high pressure air stream generated by a pulse engine at operation is ejected at high speed from the nozzle outlet. When the valve is opened, the air pressure in the cartridge hydraulic the drug into the blast pipe, where it is mixed with the high temperature and high speed air stream and is met by a sudden return